CRC Bright Zinc’s unique formulation combines superior rust inhibiting properties of zinc with a tough but flexible resin coating for heavy-duty protection and a bright finish of new galvanising.
Pure zinc particles are embedded in a resin system which forms a quick-drying highly-protective coating on bare steel or iron, with more than 50% highest purity zinc in the dried film. This organo-zinc coating provides an effective barrier for protection of treated surfaces from environmental conditions like moisture, humidity, water and heat while the zinc particles – due to sacrificial anodisation of zinc – stop rust and rust creepage if the coating is scratched, abraded or dented. CRC Bright Zinc provides a gloss top-coat finish but unlike standard paint systems, resists undercutting and blistering from corrosion. CRC Bright Zinc is ideal for touch-up and repair of damaged galvanised surfaces and effective long-term rust protection with the bright look of a newly galvanised surface. For ultimate protection, prime the metal surface with CRC Zinc It then apply CRC Bright Zinc as a top coat. CRC Bright Zinc provides excellent cover and is capable to be applied as a heavy film for extra protection without forming runs, delivered from a unique aerosol system giving a smooth even coat. Ongoing protection can be achieved through simple re-coating within 5 years, depending on conditions. Protection in extreme conditions may require re-application more frequently. Features & Benefits: Zinc-rich – More than 50% highest purity zinc in the dried film, embedded in a protective enamel coating Protective Coating – Resistant to salt corrosion, water and heat. Powerful protection in harsh conditions Bright galvanised finish – Ideal for repairing damaged galvanised surfaces to restore rust protection Excellent adhesive qualities – Forms a tough coat for long-term protection Easy application – High film build in one step Heat Resistance – Up to 120°C Long-term corrosion protection – Corrosion Protection Factor 60 (up to 5 years outdoors before recoating is necessary, depending on conditions) Sacrificial anodisation of Zinc – Stops rust and rust creepage even when scratched, abraded or dented Fast drying – Touch dry in 20 minutes, recoat immediately, full cure in 24 hours Easy re-application over existing film and/or clean surfaces – For ongoing protection Single coat – No overcoating required. For additional protection, prime the metal surface with CRC Zinc It prior to applying CRC Bright Zinc Ready to Use Aerosol – No additional mixing or chemical additives required. Easy application. No clean up Does not contain CFCs, methylene chloride MPI Approved C23 Uses: Structural steel or frames – Welded seams, spot welding repairs, rivet holes, signs and signposts, pipes, roofs Electrical – Transformers, transmission towers, earth pegs Farm equipment – Water tanks, tank stands, fences, gates, animal raceways in milking sheds and yards, farm implements and tractor draw bars, metal junction, terminal boxes, pump equipment, corrugated metal buildings Boats and boat trailers – Shackles, winches, draw bars, subframes, wheel and guards Car or caravan – Inner door panels, tow bars, exhaust tail pipes and wheel protection under hub caps Perfect touch-up – For galvanised products which have been cut, drilled or welded At home – On iron railings, roofing and spouting, gutters, plumbing, ducting, radio and TV aerials, outdoor fixtures, hinges, fences and gates, wrought iron, air conditioning and refrigeration units Industrial – Equipment and machinery, machine housings Roading and Construction – Bridges, guard rails, lamp stands For use on steel or iron – Not effective when used on non-ferrous metals Wherever iron or steel needs protection and a bright galvanised finish is required PLEASE NOTE - All products include GST